Symbios Logic SDMS 4.0 BTLDPCI-4.01.00 Diskette Building Instructions:


To create a BTLD diskette to use with SCO, you must copy the raw dd image file 
onto a 1.44 MB floppy.  The process for doing this will depend on what 
operating system you are using to create the diskette.

----------

IF YOU ARE USING A UNIX SYSTEM:
 
1)  Insert a 3.5" diskette into the  floppy drive.  

2)  At the UNIX prompt type:

dd if=/<path>/SCO40100.DD of=/dev/fd0135ds18

The <path> is where the dd image is located. This command will dd the image 
to the floppy to create a BTLD diskette.

----------

IF YOU ARE USING A DOS SYSTEM:

1)  Use a utility which will copy a raw image onto a 1.44 MB floppy to copy 
the file "SCO40100.DD" onto a 3.5" diskette.  (One such utility is "Rawrite" 
which is public domain.  Instructions for using this utility are included in 
its accompanying "doc" file.)

Upon copying the image to a 3.5" diskette, it is ready to use as a
BTLD diskette with SCO.